MOC History

Midas Cars Ltd (Oldham and later Corby)

The Beginning : Harold Dermott, a former Jaguar Development engineer, and his brother, a marketing expert started their business, D & H Fibreglass Techniques Ltd, in 1975. Initially the company built the Mini Marcos having bought the project from Marcos in that year. In 1977 freelance designer Richard Oakes was commissioned to design a more modern coupe and the Midas was born.

Mark 1 - Midas Coupe.

The first Midas appeared at the Performance Car Show in December 1978 and the first kits were delivered in early 1979.
The Mk 1 is entirely Mini based and has front indicators below a one-piece bumper.
The dash is also Mini based. The chassis numbers commenced with D10000.
Some cars have been retro-fitted with the later design of nose cone / bumper
assembly from the Mk 2.

Mark 2 - Gold, Silver, Bronze.

Gordon Murray, then the Brabham F1 designer, chose the Midas as a basis of a car he wanted to build.
The modifications he suggested were incorporated into the design and the Mk2 was introduced in 1981.
The front indicators are set into split bumpers and the dash is a wrap-around design with a Mk1 Metro
instrument binnacle.
The Mk2 came in three different build standards
- Gold, Silver and Bronze.
The chassis numbers began with 20001.
After the Mark 3 Coupe was launched, the Mk2
Continued to be sold as the Bronze until 1989.
Wraparound bumpers, styled by Steve Pearce,
Were offered on later models.

Mark 3 - Gold Coupe.

The Mk 3 was first shown at Motorfair in London in 1985 and was called the Midas Gold.
Styled by Richard Oakes, the car is entirely Austin Metro based and much rounder in appearance. than the first two models.
Chassis numbering complies with SMMT standards and is quite a long-winded affair, but end with 3011***.
Like its predecessors the Mk 3 is very versatile, either as spacious 2 seat hatch-back coupe or true “2+2” – just so long as your back seat passengers are on the small side.

Mark 3 - Gold Convertible.

The Convertible was launched at the 1988 Motorshow following “development” work
carried out by Steve Pearce using a chainsaw and plaster to come up with the stylish convertible.
Chassis numbering follows the Mk 3 format.
This model is a true convertible offering both a conventional soft-top and an easily removable hardtop.
A truly cavernous boot makes the convertible even more practical and easy to live with.

Pastiche Cars Ltd (Rotherham)
Following a disastrous fire at the Corby factory and a difficult financial climate Midas Cars Ltd went into liquidation in November 1989. Pastiche Cars Ltd were successful in bidding for the company and took control in February 1990. Pastiche continued production of the convertible; however, the specification was much reduced and the amount of work on the part of the kit builder was increased proportionately. After taking orders for ten coupes Pastiche did not produce any, before calling in the receivers at the start of 1991. There is no formal chassis numbering for the Pastiche models.

Midas Cars Ltd (GTM)
After many rumours GTM emerged as the new owners of the Midas marque. Following a re-launch at the Sandown Park Kit Car show in August 1991, the Gold convertible continued to be manufactured at the GTM factory in Sutton Bonnington, Leicestershire.
GTM added the optional hardtop to add to the appeal of this practical little roadster. GTM Midas chassis numbers now end with 4011***.
GTM sold the Mark 2 (Bronze coupe) to Midtec Sports Cars and the Mark 3 Gold Coupe model was sold to Berlin. The Bronze moulds disappeared when Midtec closed, but the Gold moulds were recently re-discovered and are now in the possession of the Club.

2 + 2 Coupe - Cortez.

April 1995 saw the introduction of a new Midas, the Coupe 2+2. Again Richard Oakes continued his association with Midas collaborating in the design of the new model.
The 2+2 is based on the Metro or Rover 100 with a K Series power unit, and features a longer wheelbase than previous cars.
The front windscreen is custom made for the 2+2 with a single wiper arm. Also, the rear screen is fixed with a separate boot lid - a saloon to all intents and purposes.
Frameless doors akin to the Mark 3 Convertible are another design feature.
Chassis numbering for the 2+2 ends with the series T3011***, similar to the format of the Mk 3 and Convertibles.
The 2+2 Coupe was re-named Cortez in 2001 when it’s convertible derivative was launched:

2 + 2 Convertible - Excelsior.

This model was unveiled at the 2001 Donnington Kit Car Show, and features an integral soft-top that is fully concealed under a special cover in the rear scuttle. It combines all the refinements of the donor Rover 100 with the poise of the Cortez into a sporting, but practical
Convertible.
The Excelsior was developed by GTM when they sold the marque to the short lived Midas Cars Ltd of Redditch (2001 to 2003).

Alternative Cars Ltd.

Alternative Cars Ltd was formed to rescue Midas Cars. A successful bid was made for the assets of Midas Cars Ltd and in early 2004, Alternative Cars Ltd set up a new workshop at Little Clanfield Mill, in Oxfordshire.
Midas Sports Cars were re-launched at the National Kit Car Show at Stoneleigh in May 2004 and initially concentrated on the 2+2 models: Cortez and Excelsior.
In 2006 a new Midas Gold convertible was built incorporating some subtle improvements and the finished car debuted at the Great Western Kit Car